LUCIA 120/2
LUCIA 120/2 has been designed and engineered with quick install and very easy setup in mind. Each unit comes supplied with a wall-mount bracket allowing for discreet on-wall location (such as behind video displays) but can also be located close to wherever it needs to be in the room – such as next to projector or integrated into a reception counter, podium & lectern or bar area. All connections are via Euroblock screw terminals (also RCA phono inputs shared with channel 1 and 2), and level setting is available on front-panel potentiometers. Advanced circuitry protects the amplifier and connected loudspeakers from potential damage caused by clipping, thermal overload, or extreme low line voltage.
Great sound, flexibility and ease of use
Lab.gruppen’s innovative LUCIA (Localized Utility Compact Intelligent Amplification) brings superior audio performance and extraordinary flexibility to a decentralized approach in AV systems design. Power, processing, control and I/O are conveniently placed exactly where they are needed. In many AV applications requiring consistent, high quality audio output, LUCIA offers a logical, costefficient and scalable solution that eliminates the complications and added expense of a centralized equipment room for amplification, matrixing and processing. All LUCIA amplifiers incorporate a digital, firmware-controlled front end coupled to a robust, durable and highly efficient Lab.gruppen output stage, all of which make it the best sounding compact amplifier in its category.
Green credentials
LUCIA amplifiers are ENERGY STAR qualified, making them an ideal choice for installation in projects seeking energy efficient certifications. The amplifiers automatically enter standby mode after a 20 minute period with no signal input, consuming less than 1 watt. Automatic power-up occurs within two seconds after an input signal is sensed.
TECHNICAL SPECIFICATIONS
General Number of channels: 2 Max total output all channels driven: 120 W Max output voltage per channel (*1): 31.0 V peak Max output current per channel: 5.5 Arms
Max output power all channels driven 2 ohms: 60 W 4 ohms: 60 W 8 ohms: 60 W 16 ohms: 30 W
Performance THD 20 Hz - 20 kHz at 1W into 8 ohms: <0.3% THD at 1 kHz and 1 dB below clipping: <0.2% Signal to Noise Ratio: >92 dBA Channel separation (Crosstalk) at 1 kHz: >60 dBA Frequency Response: 5 Hz - 22 kHz Input impedance: 10 kOhm Common Mode Rejection (CMR): 40 dB
Gain, Sensitivity and Limiters VPL for 4 ohm mode: 31 V VPL for 4 ohm mode: 31 V VPL for 2 ohm mode: 22 V VPL for 2 ohm mode: 15 V Sensitivity, balanced input: 4 dBu / 1.23 Vrms Sensitivity, RCA input: -2 dBu / 0.62 Vrms Input headroom for clip, balanced (*2): 12 dBu / 3.09 Vrms Input headroom for clip, balanced (*2): 6 dBu / 1.55 Vrms
Connectors and Buttons Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced Input connectors (ch. 1 & 2): Unbalanced RCA type Output connectors (per ch.): 2 - pin detachable screw terminals GPI (power control input) (*3): 2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain GPO (power control output) (*3): Contact closure type, 2 pins in a detachable screw terminal. Default for external monitoring of fault / protection/power off USB: For firmware update and configuration for the matrix models Cooling (*3): One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 ºC Auto mode: The power state is controled automatically by the audio signal Level adjustment (per channel): Front panel potentiometer, detented from -inf to 0 dB
Power Nominal voltage: 100 – 240 VAC Operating voltage: 85 – 265 V AC Standby consumption: <1 W Mains connector: IEC inlet
Dimensions - Weight - Finish
Dimensions: W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”) Weight: 1.9 kg (4.2 lbs.) Finish: Black aluminum front and black steel chassis
Approvals
Approvals CE, CSA, CCC, PSE, FCC, Energy Star
Warranty
Warranty 3 years, components and factory workmanship. See full warranty statement.
Notes *1: Into 8 ohms and higher *2: An analog soft limit will be engaged on the input above this level to reduce the clip distortion *3: Can be configured for different functionality via USB
